Applied Electroptics & Instruments


Optical Emission Spectrometer manufacture and upgradation. Universal Controllers for plant and instrument control with data logging on a PC.


"><< Back

SEQUENCE TIMER RUT - 10

The Sequence Timer RUT-10 is a ten channel timer designed for switching ON loads sequentially with an adjustable on and pause times. The on time is the same for all channels . During the ON time the load connected to the particular channel is switched ON. The pause or OFF time is the same between two ON times. The complete sequence is cyclic and at the end of one complete cycle the sequence re-starts automatically.

IC based electronics is used for the total system except for the load drivers which are triacs. All ICs are mounted on base. The transformer is connected to the PCB via plug-in connectors. This ensures easy serviceability of the timer. The IC chip count is kept to the barest minimum so as to enhance MTBF.

The PCB used is 1.6mm thick, double-sided glass epoxy board coated with high quality green masking for enhanced life.

The salient features of the Sequence timer RUT-10 are: -

# All components mounted on a single PCB.

# ON and OFF time can be easily set.

# Number of active channels can be selected by shorting link.

# Individual LEDs per channel for ON indication.

# Optional DISPLAY card which can be mounted directly on the PCB.The display card is provided with DIP switch for setting number of active channels and seven segment display for indicating the current active channel.

# Powder coated tough MS enclosure.

# Optional transparent front window for the enclosure for easy viewing of the display.

Contact US for Specifications and Performance Data.