Logic Trainer Model 750ALTTC

 This model consists of a set of logic gates, flip-flops, logic indicators, logic switches, pulsers, clock and   7 segments display. The front panel of the equipment is printed on the printed board itsef on which the circuit and the electronics is etched on its reverse. The sockets used for the patch cords are also   soldered. The full assmbly is on the printed circuit and there is no wiring resulting in absence of loose contacts Detailed manual with experiments.

   Logic Level Switches              :   To provide high/low outputs - 8 Nos.
   Logic Level led Indicators       :  8 Nos.
  Bounceless  Pulser Switches   : 3 Nos.
  Clock                                       :   1Hz to 100KHz in six ranges with fine control.
  Power Supply                         : 5V regulated built-in

Logic Trainer Model 750DLI(TTL)

Model 750 DLI has been designed to cover the syllabus of Digital Electronics as applicable to Diploma courses in the country. The equipment consists of +5V and +15 V supplies, clock, Hi Lo switches,LED Indicators,7 segment displays and several integrated Circuits such as Gates, Flip Flops,counters,shift Registers,coders and Encoders, Buffers, A-D and D-A converters, expanders, Schmitt Triggers etc.  On the back of the panel, the electronic  circuit is wired. The sockets used for insertion of the patch cords are also soldered on the PCB. This has resulted in a very high degree of  reliability.

  Power Supplies       :   5V +1 %, +15V + 1%, Regulated
  Clock                       :   1Hz to 1MHz in appropriate  ranges
  Hi-Lo Switches       :   16 Nos.
  LED Indicators       :   16 Nos.
  7 Segment display   :   3 Nos.with built-in Decoders & BCD I/P
  7 segment display    :   1 No. with seperate 7446 decoder
  'CMOS' Option      : 750 DLI with CMOS  IC's.