Non-Radioactive
Photoluminescent Coating
Polyurethane
Based Corrosion Resistant Coating
Epoxy
Based Corrosion Resistant Coating
Frictionless
Coating For Better Efficiency
Impregnable
Glass Flake Barrier Coating
High
Temperature Protective Coating
Thermal
Barrier Insulation Coating
Fire
Hazard Protective Coating
·
Specially designed to coat the boiler bricks
from water entering them while the water washing of the boiler furnace is
conducted during routine maintenance.
·
The coating burns off completely during
subsequent flash up.
Non-Radioactive Photoluminescent Coating
·
Paint that glows in dark for 60 - 90 minutes
and gets recharged when light falls on it.
·
Ideal for places where identification is
needed in case of power failure emergency.
·
Available in Green, Signal Red, Orange, Yellow
an Blue colour.
·
This
is a 95% pure Zinc composition to protect all ferrous surfaces from rust and
corrosion.
·
The
coating provided physical barrier as well as cathodic protection to the steel.
·
It forms
continuous impervious metallic barrier that does not allow moisture to contact
base metal and even if the coating film get damage or scratch, the sacrificial
corrosion of zinc coating through cathodic protection protects the surface.
·
Can
be used on damaged hot dip galvanized surfaces, welded seams, steel frames,
pipelines, etc.
Polyurethane Based Corrosion Resistant Coating
·
This
coating has good resistance to scratch, abrasion and ultraviolet rays.
·
It
bonds well to wide range of substrate and protects from alkalis, saline and
other chemicals.
·
The
cured product is very elastic and withstands expansion and contraction of the
substrate without cracking.
·
It
can be used for vessels, pumps, reinforcement rods, etc.
Epoxy Based Corrosion Resistant Coating
·
This
is a 100% solid, solvent free high build anti corrosion epoxy coating for
protecting steel structural subject to severe corrosive environments.
·
The
coating provides a durable smooth finish having excellent weatherproof
resistance and also to saline, moisture, water, acids, alkalis, oils and
corrosive media.
·
It
can be easily applied by brush, roller or spray gun.
·
Excellent
adhesion to all metals as well as concrete.
·
It
can be used for pipelines, ducts, tanks, retaining walls, platforms, storage
tanks, cooling towers, etc.
·
This
is a two-part epoxy based coating system forming tough, transparent coating
having low surface energy that reduces adhesion ability over the coated surface
of the product.
·
The
coating with non-stick properties is conducive for repeated cleaning by water
jet during routine planned maintenance shut down.
·
It
offers good adhesion to wide range of substrates and excellent resistance to
solvents, ultraviolet rays etc.
·
It
can be used for all types of fans, pumps, slide valves, cutting blades, process
equipments etc.
Frictionless Coating For Better Efficiency
·
This
is a two part coating system designed for providing frictionless glossy coat which
facilitates streamline flow to improve the efficiency of pumps upto 5% new
pumps and 28% for those already in service, reducing operating costs
considerably.
·
It
can be used for all kinds of pumps, valves, subsequent equipment, process
vessels, pipelines, etc.
Impregnable Glass Flake Barrier Coating
·
This
is a brushable system having low permeation rate to provide impregnable barrier
for efficiency enhancement and excellent under cutting resistance.
·
The
coating based on isophthalic polyester offers long term resistance to dilute
acids, dilute alkalis, metal salts & petroleum products. Ideal for
aggressive atmospheric environments and immersion conditions.
·
It
can be used for Seawater cooling systems, pipelines, fuel storage tanks, ducts,
etc.
High Temperature Protective Coating
·
This
is a single part heat resistant coating available in different grades for
service conditions in the range of 210°C, 410°C & 610°C that does not crack or
peel off.
·
Outstanding
cathodic protection against humid and saline environment.
·
It
can be used for Chimneys, blowers, burners, boilers, kilns etc.
Thermal Barrier Insulation Coating
·
This
is an insulation coating system having a wide temperature range of –32°C to 65°C.
·
The
coating blocks heat transfer through the painted surface, saves electricity and
heat energy consumption thus achieves remarkable energy efficiency.
·
It
is compatible with all types of paints and coating.
·
Has
an Excellent resistance to UV rays and atmospheric corrosion.
·
It
can be used for cold storage facilities, furnaces, steam pipes, etc.
Fire Hazard protective coating
·
This
is a single part, water based coating system for protection of combustible
surface exposed to high intensity fires and short circuits.
·
The coating
prevents spreading of fire by foaming and swelling upon exposure to flame or
heat and forms thick insulating spongy layer that seals out oxygen.
·
It
can be used for General combustible materials, wooden platforms, false ceiling,
electrical cables, ware houses etc.
Back to Product
Range Introduction Page
This information has been collected by carefully investigation and
serves only as a guideline for application. Due to the number of possible
application methods, we do not assume responsibility for any particular
technical result.