WIRE ROPE / CABLE CUTTER

HYDRAULIC TYPE

- : WORKING : -

The wire rope/Cable cutter consists of a hydraulic plunger pump which when actuated by the handle, releases valve being in close condition,pumps oil in the cylinder,forcing the ram out.The ram has a cutting blade attached to it and this pierces the wire rope or cable held against a pair of U shaped blades housed in U blade holder,which is hinged to the cutter body at the bottom and the upper link (latch) at the top.This arrangement enables the cutter to be employed at any point of an endless wire rope or cable.
The releas valve provided at the top enables the self retracting ram to return to its position.The air valve ensures smooth working of the ram.

- : ADVANTAGES :-

Steel construction with case hardened pins.
Hardened & ground tool steel cutting blades and U blades.
Compact and light weight.
Portable and convenient to employ in places with restricted floor space.
Ease of operation and handling.
Interchangeability of parts facilitates replacement.
 
 
MODEL
CUTTING
DIAMETER
DIAMENSION
IN MM
NET WEIGHT IN KG.
PACKING
CASE
GROSS
WT IN KG
-
-
L x B x H
-
L x B x H
-
HC - 1
32 MM
425 125 210
22 KGS.
500 160 280
26 KGS.
HC - 2
50 MM
520 150 230
36 KGS.
580 200 300 
42 KGS.

ELECTRIC MOTOR TYPE

Our latest developement is of wire rope / cable cutter is with electric motor which has a capacity of cutting upto 100 mm diameter.

Specification on request.

Due to continuous improvement in design ,above specifications are subject to alterations.
 

 HOME              PROFILE           PRODUCT RANGE           CONTACT